RV3500 Rig-Vac Modular Vacuum System

Features:

• Vacuums liquids, sludge, and suspended solids and drill cuttings. Can also clean out ditches, cellars, sumps, and skims off pits or cuttings boxes.
• System can be used as ENVIRONMENTAL STATION for compliance with EPA regulations.
• Proactive first line of defense against spills in tank storage area and plants.
• Skid mounted tank with separate semi-enclosed power unit.
• Designed to function as a stationary, centrally located unit. PVC piping with vacuum connections can be installed from the unit to strategically located work stations by Max-Vac technicians for the rig crew after installation. Remote switching is optional.
• Ideal for use with NORM waste.
• Mud lost during trips, pulling wet strings or accidental spillage can be reclaimed and recycled through the mud system. Provides safe footing on rig floor, decks and ladders.
• Unit can be set up with separate discharge lines to recycle and for disposal.
• Virtually a must for rig operation in a zero discharge environment.
• Simple maintenance and operation. Units have performed years of reliable service with minimal maintenance required.

Specifications:

• Dimensions: Length 10', width 42", height 5'
• Approximate Weight: Tank and skid 1340 lbs., Power unit 1340 lbs.
• Power: 480 volt, 20 hp explosion proof electric motor with 200' of 8SO cable, EYS fittings
• Tank: 1/4" x 42" x 72", 450 gallon cap, SA-36 Carbon Steel: Epoxy coated
• Manway: 18" for ease of clean-out
• Blower: 350 cfm at 16 in. Hg (maximum 25" Hg) with relief valve for safety and to maintain proper operating range
• Discharge valve: 4" full opening knife gate valve for manual discharge
• Hoses: 200' of 2" suction hose with wand vacuum attachment and squeegee connection. 30' of 3" connecting hose. 30' of 4" discharge hose. Note: Flexible hoses can be replaced with PVC piping for installing remote vacuum stations around perimeter of the rig
• Muffler: Universal Industrial noise suppressor